– 4 surveying channels
– For compact overfill or leakage sensors
MAXIMAT® C, MAXIMAT® VK…, MAXIMAT® LW…
– Microprocessor controlled
– Automatic sensor detection and survey
– Sensors and loops tests integrated
– Optical and acoustic (>75 dB) alarms

– Float level detection
– For aggressive and non electrically conductive liquids
– Positive active alarm
– Auto diagnostic system and LED indication
– Approvals: DIBT Z-65.13-294, for overfilling detection WHG§19, and VLAREM II

– Capacitive detection
– For aggressive and conductive liquids
– Positive active alarm with SHR relay
– Auto diagnostic system, LED status display
– All plastic materials
– No electrode in contact with the fluid
– Fittings: threaded, flanged process connections
– Adjustable immersion depth

Capacitive detection
For aggressive and conductive liquids
Positive active alarm with SHR relay
Auto diagnostic system, LED status display
All plastic materials
No electrode in contact with the fluid

– 4 adjustable switching points
– Convenient for aggressive and loaded fluids even viscous or / and sticky fluids
– Inlet for flushing the stem with compressed air
– Range: up to 10 m Water Column
– Reliable, without mobile assembly

– Scale range available from 1 to 500 m WC
– Materials
      Sensor and probe: Stainless steel 316 L
      Diaphragm: Hastelloy C276
      Cable: PUR (polyurethane)
– Internal surge protection
– Version ATEX available:
– Maritime certificate, DNV uppon request

– Continuous level transmitter
– Output 4-20 mA or Ohm
– Accuracy: 10 mm
– Direct mounting above the tank
– Available for MAGTOP and SFA

– Level measurements on open channel flumes
– Flow rate and totalization on effluents
– For foaming and charged fluids
– Directly link with the BAMOPHOX 759
– Range from 0 500 mm WC
– Air generator with flow rate regulation
– Accuracy ± 1 %
– 4-20 mA analogical output
– Wall mounting IP 55
– Supply 230 V – 50/60 Hz

-Sonde “TDR” 4 fils
-Mesure continue 4-20 mA
-Echelle configurable

• Version mono tige de 100 à 3000 mm
• Version câble de 1000 à 20000 mm
• Version coaxiale de 100 à 6000 mm

-Pression de -1 à + 40 bar
-Précision ± 3 mm
-Versions ATEX : II 1/2 G – II 1/2 D ou II 2 G – II 2 D

The MBLT Miniature Submersible Level Transmitter is only 0.63″ in diameter making it ideal for level monitoring in well and borehole applications. Constructed for years of trouble free service, the MBLT has a welded 316 SS body and 316 SS nose cap. Body top is also 316 SS and tapered to prevent damage or snares when pulling the unit out of the installation. Featured in the MBLT is a precision ±0.10% or ±0.25% of full scale accuracy output, better than BFSL or BSL rated outputs used by most competitors. Lightning and surge protection (not guaranteed or covered by standard warranty) is included standard to stand up in harsh applications. MBLT comes with a choice of polyether polyurethane or ETFE cable materials and all are vented for barometric pressure compensation. Vent is covered with a maintenance-free filter preventing particulate or water droplets from entering the transmitter.