The JCL series sample gas cooler is specially designed for use in the emission monitoring. Thanks to the low dissolution rates of water-soluble gases very small concentrations of eg SO2 can be measured. In addition, the JCL gas cooler is modular designed. This means a device of the JCL series can be equipped with humidity control, remote diagnosis, gas pump and acid dosing pump.

The JCM series gas cooler from JCT is based on the peltier technique of cooling. This proven technology allows for an extremely robust compact cooler that is also very lightweight, hence it is ideal for use in applications with limited space.
The JCM series coolers are available with a range of options that can include moisture monitoring, integrated peristaltic drain pumps and/or temperature alarm.  These compact gas coolers have corrosive resistance high quality heat exchangers and are ideal for gas analysis or water analysis.

The JPES heated portable gas sample probe is used for applications where periodic monitoring is required over a short time period (normally less than 1 day). The handling and operation of the JPES is very easy due to it’s light weight, flexibility, simple set up and tool-less operation. Filter changes are quickly performed without any tools and initial set up is done within minutes. All parts required are supplied in a robust and compact carry case which contains the sample probe, heated hose and all the required accessories.
The JPES offers the best solution for periodic monitoring, that, coupled with easy set up, fast warm-up and simple operational use and maintenance, provides the ONLY solution you will ever need. 

Now also available with the portable heated sampling pipe – JBER

– Pt 100 Ohm at 0°C
– Compatibility with our electrode holders
– Range: -20°C up to +150°C

– Simple and economic assembly
– pH or ORP in-line measurement
– For gel type electrodes with 13.5 fitting
– Maximal pressure 7 bar/ 20°C
– Maximal temperature 50°C
– Material PVC
– Socket ends diameter 25 mm,
– Options: unions; DN20 PN10 flanges

– CIP disinfection monitoring in Food Industry
– Range: from 0.001 up to 20.00 g /L
– Output signal: 0/-2 V
– With surface-active additives proofed diaphragme
– Pressure limit: 1 bar as a maximum
– Unnecessary zero adjustment

– CIP disinfection monitoring in Food Industry
– Range: from 0.001 up to 20.0 g /L
– Output signal: 4-20 mA
– With surface-active additives proofed diaphragme
– Pressure limit: 1 bar as a maximum
– Unnecessary zero adjustment

REFERENCE SYSTEM

If there is not a special mention, all our electrodes use a reference system as Ag/AgCl with a porous reference junction in ceramic: theoretical zero is at pH 7 (0 mV).

Theoretical gain is close to 58 mV per pH units (at 20°C).

DIN coaxial connectors

To connect 9060 cables on any coaxial pH/ORP input and pH electrodes with a connecting head S7 type.

This patented connector is easy to fit on site with our cables (a soldering iron is necessary – technical leaflet provided with the connector).

– pH/ORP programmable monitor and regulator
– Alphanumeric back lighted LCD display
– Friendly using menu
– Scales: 0 – 14 pH and ± 1000 mV through configuration
– Temperature compensation Automatic or manual
– 2 analogical outputs 0/4-20mA galvanic insulated
– 4 relay outputs (Normally Open contacts)
– 1 input to switch the regulation on Stand-by
– 2 models available:
      Panel mounting 72 x 144
      Wall mounting IP 65