The JCT JNOX series of NOx converters are designed to efficiently convert NO2 to NO prior to measurement by NDIR extractive analysers.  The high quality and reliability of the conversion is characterized by an efficiency of over 95% at high flow rates, as well as a low maintenance, long life converter cartridge.
The JNOX series converters are available in 4 different models including options for bypass streams with selection valves and metallic or carbon converter material; thus ensuring that the JNOX series meets all requirements.

This holder is designed for pH / ORP / 0xygen electrode probes by side of a basin or an open channel (see page 130, 135 & 460).
Easy adaptation with adjustable distances and orientation on 360° angle to clear of barrier, post, border…
Equipped with an open cabinet, the monitor is protected and display still readable.
The base and junction devices are made of aluminium.

Free chlorine
Total chlorine
Chlorine dioxide
Hydrogen peroxide
Peracetic acid 

Conductivity cells BF 1200 are mounting with a PG 13.5. The stem is in glass of 120 mm long and 12 mm diameter.
On site, they need to be installed with holders; different kinds of probe exist, immersion probes and on-line probes.

Conductivity cells type 1200 and 1250 use a connector 9054.

Conductivity cells type 1205 and 1255 are factory cable built in, with 4
wires and 1 m long.

A complete system includes a CP1 probe (ZO or ZR type) connected to a TRUBOMAT GS3 controller. It provides a contact signal as soon as the turbidity reaches the preset value.

The emitter TT-GS send the IR beam (940 nm pulsated 8 kHz) through the fluid to the receiver TR-GS. The variations due to the turbidity are fully used by the TRUBOMAT to detect the over passing preset value.

To avoid false alarms due to air bubbles or accidental excess of turbidity, switching delays are adjustable from 0 to 10 seconds (increasing and decreasing turbidity).

Dissolved oxygen monitor

BAMOSOFT Control provides a safe survey on water quality with a visual alarm and 4-20 mA output signal.
The monitored softened water threshold value can be defined from 0.25% up to 10% in reference to raw water hardness (8 step values available).
A pulse signal input allows running a monitoring cycle when necessary.
Through a current loop the indicated water hardness value will put out and allows a record of the hardness progress. 

BAMOSOFT Smart monitors a preset residual water hardness threshold value from the outlet of the water softener system. Threshold value is fixed at 10% of inlet raw water hardness.

Example with tap water:
      – Raw water hardness inlet = 12.6°e → or 18°f
      – BAMOSOFT Alarming when softened water outlet is > 1.3°e → or > 1.8°f

Principle
Amperometric method with a closed cell of 2 electrodes; wasted sample.
The probe includes a CTN sensor for the temperature compensation.

Mounting / Recommendations
The measuring at a constant flow rate requires the use of a specific cell holder (data sheet 193-95).
The complete assembly optimizes the operations.

Article no: 0699 3070

With the Atex approval for Zone 1 the established dew point measuring instruments FA 300-2 can now be used in areas of the industry as well.

FA 300-2 Ex may only be used in connection with approved Ex-rated power supplies or safety barriers or galvanic separating elements with max.: 
UO = 30 V max.
IO = 100 mA max.
P0 = 1 W max.