Home » Catalog » Analysis environment » Analysing equipment for liquids » Chloor

Chloor


Bamophox 194 - IPP

Bamophox 194

– Alphanumeric back lighted LCD display
– Friendly using menu
– 1 sensor input (4-20 mA or 0/-2 V)
– Parameters according to the sensor in use:
free chlorine, total chlorine, chlorine dioxide,
ozone, hydrogen peroxide, peracetic acid
– 2 analogical outputs 0/4-20 mA, galvanic insulated
– 3 relay outputs
– 1 relay for default or timer
– 1 flow controller input
– 2 models or panel mounting or wall mounting

OPTIONS:
RS 422/ J-BUS + Logger
Extension monitor for a second parameter

More info

Bamophox 192 - IPP

Bamophox 192

– Alphanumeric back lighted LCD display
– Friendly using menu
– Ranges
      from 0 to 5 mg/l for free chlorine
      -20…+160°C for temperature
– 2 analogical outputs 0/4-20mA, galvanic insulated
– 3 relay outputs (Normally Open contacts)
– 1 relay output for system alarm
– 1 input to switch on Stand-by the regulation
– 2 models available:
      Panel mounting 72 x 144
      Wall mounting IP 65

– OPTION
Extension for a 2nd measurement input

More info

Bamochlor 192 open cell - IPP

Bamochlor 192 open cell

– Open cell amperometric method
– Electrochemical cell
– Self cleaning
– Flow adjustment
– Wetted parts are of PVC and PMMA
– pH electrode by insertion, permanently or not

More info

Bamo CS2-3 - IPP

Bamo CS2-3

– For drinkable water monitoring
– Range: from 0.01 up to 10 ppm
– Output signal: 4-20 mA
– Pressure limit: 0.5 bar as a maximum
– Unnecessary zero adjustment

More info

Bamo CP2-1 - IPP

Bamo CP2-1

– For swimming pool or drinkable water
– Range: from 0.01 up to 10 ppm
– Output signal: 4-20 mA
– Pressure limit: 0.5 bar as a maximum
– Unnecessary zero adjustment

More info

Bamo CC1 - IPP

Bamo CC1

– For swimming pool water monitoring
– Range: from 0.01 up to 10 ppm
– Output signal: 4-20 mA
– Pressure limit: 0.5 bar as a maximum
– Unnecessary zero adjustment

More info