– μS or MΩ built-in program
– Programmable scales:
      0 – 200 Ω up to 0 – 200 MΩ
      0 – 2 μS up to 0 – 20 mS
      TOR version: 0 – 2 mS up to 0 – 2000 mS
– Convenient probes:
      – cell factor of 10, 1, 0.1 or 0.01
      – and TOR sensor TCS 100
– Temperature compensation: Automatic or manual
– 2 analog outputs 0/4-20mA, galvanic insulated
– 3 relay outputs (Normally open contact)
– 1 input to switch the regulation on Stand-by
– 2 models:
      – Panel mounting 72 x 144
      – Wall mounting IP 65

OPTIONS :
      – RS 422 /J-BUS + LOGGER
      – Extension for 2nd measurement input

More info

– 2 independent sensors
      Input 1: range 0…20 MΩ
      Input 2: scalable range 0…20 MΩ / 0…2 MΩ
– Dedicated probes and sensors
      With Factor probe C = 0.01, 0.1, 1 and 10
– 2 adjustable analog output 0/4-20 mA
– 3 relay outputs (NO contact)
– Wall mounting IP 65

More info

– Process measurement
on line
or by immersion
– For waste liquids
– Wide range of applications
– Large scales: from 0-2 to 0-2000 mS
– Probe material: NORYL

More info

– Resistivity and Conductivity probes
– Cell factors 0.1 and 0.01
– Reliability and sturdiness
– Construction: Stainless Steel and PTFE, PVC
– Also to be use with the BAMOPHOX

More info

Conductivity cells BF 1200 are mounting with a PG 13.5. The stem is in glass of 120 mm long and 12 mm diameter.
On site, they need to be installed with holders; different kinds of probe exist, immersion probes and on-line probes.

Conductivity cells type 1200 and 1250 use a connector 9054.

Conductivity cells type 1205 and 1255 are factory cable built in, with 4
wires and 1 m long.

More info