– Alphanumeric back lighted LCD display
– 2 models available:
Panel mounting 72 x 144 (436E)
Wall mounting IP 65 (436M)
– 3 relay outputs (Normally Open contacts)
– 1 relay output for system alarm
– 2 analogical outputs 0/4-20mA
– Scales
NTU, FAU, mg/L, g/L, FNU
From 0.000 to 9999
OPTIONS:
– RS 422 /J-BUS + LOGGER (MMC card)
– Extension for a 2nd measurement input (displayed values on the lower line)
– Stainless steel in-line turbidimeter according to ISO 7027
– Turbidity transmitter
– With two IR emitters and one IR receiver
– Two models:
0.01 … 20 FNU (5 ranges)
0.1…1000 FNU (5 ranges)
– 4…20mA output signal (4 wires)
– Triclamp or Flange connections
– Compact transmitter 4-20 mA
– Measurement according to ISO 7027, infrared light source 860 nm
– Selectable Ranges in FNU
0…50 /…100 /…200 /…500 /…1000 /…2000
– High resolution from 0.01 FNU
– Integrated 4 digits display for actual value, programming, settings
– Anti-fouling coating of optical windows
– Integrated automatic external light compensation
– Integrated colour/dirt compensation (switchable)
– Flow-through in-line turbidimeter acc. ISO 7027
– Turbidity transmitter
– With two IR emitters and one IR receiver
– Two models:
0.01…20 FNU (5 ranges)
0.1…1000 FNU (5 ranges)
– 4…20mA output signal (4 wires)
– Flange or thread connection
A complete system includes a CP1 probe (ZO or ZR type) connected to a TRUBOMAT GS3 controller. It provides a contact signal as soon as the turbidity reaches the preset value.
The emitter TT-GS send the IR beam (940 nm pulsated 8 kHz) through the fluid to the receiver TR-GS. The variations due to the turbidity are fully used by the TRUBOMAT to detect the over passing preset value.
To avoid false alarms due to air bubbles or accidental excess of turbidity, switching delays are adjustable from 0 to 10 seconds (increasing and decreasing turbidity).
